- 产品详情
Introduction and features：
This equipment is developed in accordance with the requirements of touch screens and mobile phone shells. It can be used for front and rear horizontal connection and upper and lower process connections.
The mixed gas of argon (AR) and oxygen (O2) is used to clean the surface of the product, improve the cleanliness of the surface and enhance the adhesion of the product, and have a greater effect on the surface modification of the product and increase the activity. It is suitable for carriers with different widths, which is light and compact, and has high versatility. At the same time, the temperature and flow rate of the cleaning area can be monitored in real time, and the operating speed can be set according to the needs of different products. It can be connected to the MES system to collect and upload production information in real time.
Advantage:
• Can be docked with horizontal lines or up and down process lines
• Small size, flexible switch line
• Can monitor the temperature of the treatment area
• Optional magnetic transmission or belt transmission
• Can monitor gas flow and ratio mixing
• Monitor the height of plasma
• Can be remotely controlled
Basic specifications of the machine:
Maximum machine size (appearance) | 1400mm(L)*1100mm(W)*1650mm(H) |
Effective width | 810mm |
Input voltage | 220V 50/60HZ/3KVA |
Pneumatic pressure | 0.5-0.7Mpa |
Production speed | 0.1-5m/min |
Working height | 950mm-1050mm |
* Equipment design and specifications can be adjusted to improve equipment performance.