- 产品详情
Introduction and features:
This equipment peels the roll-type, half-cut cover film from the release paper by a mechanical arm, transfers it to the transfer table to make it level, and then uses the CCD camera to align and suck the suction cup to adhere to the FPCB, and finally pass the pre-fastened Rewind after the press is fixed.
Advantage:
• Straight knife cutting, arc cutting is also optional.
• Cover film roll and manual sheet feeding, FPCB RTR method.
• The equipment has an automatic accuracy check function.
• The equipment contains a receiving platform and a cutting platform.
• FPCB infrared material installation auxiliary function.
• 95% high-performance static elimination bar.
• Support MES system, receive and feed back production information.
• CPK target chart automatic calculation function
Basic specifications of the machine:
ITEM | SPECIFICATION |
Dimension | 3580mm(L)×1750mm(W)×1848mm(H) |
Working Size | Max : 250mm × 350mm |
Tact Time | 8Sec/piece Will vary according to the size and shape of the material |
FPCB Replacement Time | 7Sec/Cycle |
Bonding Accuracy | ±100μm |
Motion | Motion X,Y,θ servo motor |
Table | Vacuum system & Heater |
Vacuum | Air consumption 2534nl/min |
Control | PC Control |
UPS | With 0.48KW |
Power Supply | 220V × 3Ph × 60HZ (16KW) |
Air Supply | 5 ～ 7kgf/cm2 (Main Air ø12) |
* Equipment design and specifications can be adjusted to improve equipment performance.